S71 Custom Shop ” Nitro S Vintage Graffiti Yellow ’56, Super-Heavy Aging “, USA.

Home/CUSTOM RELIC/S71 Custom Shop ” Nitro S Vintage Graffiti Yellow ’56, Super-Heavy Aging “, USA.

S71 Custom Shop ” Nitro S Vintage Graffiti Yellow ’56, Super-Heavy Aging “, USA.

1790,00CHF

Out of stock

S71 Custom Made unique « Nitro S Vintage Graffiti Yellow ‘56, Super-Heavy Aging ». 
Selected light Alder body Custom made by USACG in Washington with a 100% Nitrocellulose finish and plenty of details/checking marks.
1-piece high-quality Maple neck under Fender Licence from Allparts, Houston USA.
accurate 50s “C” Neck specs:
7,25″ fretboard radius, 21 Vintage thin frets, .84″/.95″ thickness
Handwound « Mid 50’s » Collins Pickups  in Dallas Texas. « 7-Sounds «  wiring mod.
Genuine Gotoh Japan Vintage style tremolo, tuners & Gotoh neckplate.
AllParts USA Parchment Aged Pickguard.
C.O.A included.
——–
Made in USA.
——–
NEW guitar, including C.O.A and invoice.
(the hardcase in pictures is for illustration purposes only)
S71 Custom Guitars is a professional seller commercially registered in Switzerland.

Out of stock

Category:

Description

—————
Vintage neck from Allparts USA specs:
  • 21 vintage frets (.079 x .043″)
  • Solid 1 piece maple neck
  • 7.25″ radius
  • 1-5/8″ nut width
  • Heel width 2-3/16″
  • Truss Rod adjustment at heel
  • Neck thickness .84″ at first fret, .95″at twelfth fret
—————
Collins Texas Mid 50’s T-105 Handwound Pickups full-specs:
  • Custom modeled set of single coil pickups after the early Strats mid 50’s with vintage staggering .187 Alnico 3 magnets oriented S-N-S spec and calibrated for strength
    These pickups are over-wound progressively 5 % to bridge for old style sparkle and chime  striking balance with the selector. Alnico 3 will give focused mids and round the highs to tame the ice picks and draw out bell tones, the bottom is loose and bouncy (vintage tones) Alnico 3 magnets have less string pull than their Alnico 5 counterparts and are the weakest of Alnico magnets but in rod form stronger than 2’sHigh quality vulcanized fiber flatwork black .062 top with black .093  bottomsMade in the U.S.A. hand wound in Texas in my own shop
  • Though ohms are subject to change in temperature these read around
  • 7.44 K (neck) 2.59 Henries
  • 7.61 K (mid) 2.64 Henries
  • 7.75 K (bridge) 2.90 Henries

    measured around 70 degrees
    The sandcast alnico 3 magnets were sealed before winding in my own resin formula to prevent magnet to wire failure
    Wound with a beautiful bright red modern single poly AWG43 wire and potted in paraffin/bees wax to silence microphonics.

    Vintage black/white cloth wiring about 12″ long for the most demanding hookups. Vintage surgical rubber tubing with nickel screws
  • 52mm spacing profileNote: These Model T-105 scatterwound pickups will hum cancel in the 4th and 2nd positions
  • They have all the quack and chime early single coils are known for
    Dripping with tone and ready to rock
    Creamy like butter and clear as a bellThey will shine in Psychedelic Blues, Blues Rock, Rock, Jazz, Country any genre you want to put them through
Go to Top