S71 “Custom Nitro S” Vintage ’59 Surf Green Heavy-Relic. Roasted Quartersawn/AAA Rosewood neck

//S71 “Custom Nitro S” Vintage ’59 Surf Green Heavy-Relic. Roasted Quartersawn/AAA Rosewood neck

S71 “Custom Nitro S” Vintage ’59 Surf Green Heavy-Relic. Roasted Quartersawn/AAA Rosewood neck

1890,00

S71 Custom made unique « Nitro S Vintage ’59 Surf Green Heavy Relic ». selected lightweight body (3,2kgs/6.6lbs for the whole guitar) Custom made by USACG in Washington.
Accurate « 1959 C Shape » .790 @ 1st fret / .970 @ 12th fret Neck specs ROASTED Quartersawn maple AAA Dark Rosewood fretboard with Vintage Radius 7.25″, Engraved Logo, Custom made by luthier near New-York with Nitrocellulose finish.
Handwound « Five 9 » Pickups  in, Dallas Texas. « 7-Sounds «  wiring mod. Genuine Gotoh Japan tremolo & Kluson style tuners & neckplate with serial number. C.O.A included.
Custom made in USA.
NEW guitar, including C.O.A and invoice.
(the hardcase in pictures is for illustration purposes only)
S71 Custom Guitars is a professional seller commercially registered in Switzerland.
Category:

Description

Accurate « 1959 C Shape » Luthier custom made neck in USA, specs:
  • Roasted Quartersawn maple neck
  • AAA Dark Rosewood fretboard
  • .790 @ 1st fret / .970 @ 12th fret
  • Vintage Radius 7.25″
  • “Cream Clay” Vintage style front and side dots
  • 21 Tall/Medium frets from Jescar USA
  • Heel Trussrod
  • Graphtech « Nubone » nut, made in Canada
————
Genuine custom hand wound vintage pickup full specs:

  • The Five 9 is modelled after the late ’50’s single coil pickups with vintage stagger .195 Alnico 5 magnets oriented N-S-N spec and calibrated for strength
    These pickups are overwound progressively 5% to bridge for balance
    High quality vulcanized fiber flatwork .062 top with period correct black .093  bottoms
    Made in the U.S.A. hand wound in Texas in my own shop
  • Though ohms are subject to change in temperature these read around
  • 5.88 (neck)
  • 6.01K (mid)
  • 6.17K (bridge) measured around 70 degrees

    The sandcast alnico 5 magnets were sealed before winding in my own resin formula to prevent magnet to wire failure
    Wound with a beautiful bright red modern poly-nylon AWG42 wire and potted in paraffin/bees wax to silence microphonics.

    Vintage black/white cloth wiring about 12″ long for the most demanding hookups. Vintage surgical rubber tubing with nickel screws

  • 52mm spacing profile
  • Note: These Model T-159 scatterwound pickups will hum cancel in the 4th and 2nd positions

    They have all the quack and chime early single coils are known for
    Dripping with tone and ready to rock
    They will shine in Blues, Rock, Jazz or Country any genre you put them through !