S71 “Custom Nitro S” Vintage ’75 Shoreline Gold Heavy-Relic. Roasted Quartersawn Large Reversed Head

//S71 “Custom Nitro S” Vintage ’75 Shoreline Gold Heavy-Relic. Roasted Quartersawn Large Reversed Head

S71 “Custom Nitro S” Vintage ’75 Shoreline Gold Heavy-Relic. Roasted Quartersawn Large Reversed Head

1890,00

S71 “Custom Nitro S” Vintage ’75 Shoreline Gold Heavy-Relic. Roasted Quartersawn Large Reversed Headstock neck.
S71 Custom made unique « Nitro S Vintage ’75 Shoreline Gold Heavy Relic ». 
Selected lightweight Alder body Custom made by USACG in Washington with Vintage specs.
Modern Chunky C shape Neck specs similar to a 1966 C shape, ROASTED Quartersawn maple AAA Dark Rosewood fretboard with  Modern Compound Radius 9.5-14″, Real Mother of Pearl dots, Engraved Logo, Custom made by luthier near New-York with Nitrocellulose finish.
Handwound « Road Kings ’75 » Pickups in Dallas Texas. « 7-Sounds «  wiring mod. Genuine Gotoh Japan Vintage style tremolo, Kluson style tuners & neckplate with serial number. Rare Bronze Anodized metallic Pickguard. E-Certificate of Authenticity included.
Custom made in USA.
Category:

Description

NEW guitar, including E-C.O.A and invoice.
(the hardcase in pictures is for illustration purposes only)
S71 Custom Guitars is a professional seller commercially registered in Switzerland.
——-
Modern Chunky/1966 C shape Luthier neck custom made in USA, specs:
  • Roasted Quartersawn maple neck
  • AAA Dark Rosewood fretboard
  • .850 @ 1st fret / .950 @ 12th fret
  • Compound Radius 9.5 to 14″
  • Nut Width 1-11/16″
  • Real Mother of Pearl front dots and Cream side dots
  • 22 Medium/Jumbo frets from Jescar USA
  • Headstock Trussrod
  • Graphtech « Nubone » nut, made in Canada
————
  • These are the Road Kings ’75 genuine Collins custom hand wound symmetrical stagger modern pickup set made from the finest materials
  • Not a modeled pickup but rather a new development single coil pickup with a symmetrical stagger for modern 9-12 inch radius necks and modern string configurations.187 Alnico 5 magnets oriented S-N-S spec and calibrated for strength
  • (Why a symmetrical stagger?? Understanding that the “Vintage Stagger” came in a time when most strings had wound G string. And the vintage stagger was introduced to compensate for the perceived volume differences between the wound and un-wound strings)
    These pickups are overwound progressively 7.5% to bridge for balance and a slightly hotter output.
    High quality red vulcanized fiber flatwork .062 top with gray .093  bottoms
    Made in the U.S.A. hand wound in Texas in my own shop
  • Though ohms are subject to change in temperature these read around
  • 5.65 K (neck) 2.06 Henries
  • 6.23 K (mid) 2.36 Henries
  • 6.47 K (bridge) 2.60 Henries
    measured around 70 degrees
     

    The sandcast alnico 5 magnets were sealed before winding in my own resin formula to prevent magnet to wire failure
    Wound with a beautiful bright red modern poly-nylon AWG42 wire and potted in paraffin/bees wax to silence microphonics.
    Vintage black/white cloth wiring. Vintage surgical rubber tubing with nickel screws

  • 52mm spacing profile
  • Note: These Model T-175 scatterwound pickups will hum cancel in the 4th and 2nd positionsThey have all the quack and chime early single coils are known for with higher output
    Dripping with tone and ready to rock
    They will shine in Blues, Rock, Classic Rock, Psychedelic Blues, Jazz or Country any genre you put them through
    Whether you are custom building, replacing a non working pickup or just want to breath life into an old guitar this is your ticket

    Much of your tone is in your hands while no one can promise that you will play like Hendrix, Clapton, Gallagher or Blackmore by a pickup upgrade you will have the tools at your disposal to take you there