S71 Custom Shop « Lefty 1961 Sonic Blue Heavy Relic » Swamp Ash JBass, Handwound Pickups in Texas. Made in USA.

Home/CUSTOM RELIC/S71 Custom Shop « Lefty 1961 Sonic Blue Heavy Relic » Swamp Ash JBass, Handwound Pickups in Texas. Made in USA.

S71 Custom Shop « Lefty 1961 Sonic Blue Heavy Relic » Swamp Ash JBass, Handwound Pickups in Texas. Made in USA.

CHF 1'416.00

Out of stock

S71 Custom Shop « Lefty 1961 Sonic Blue Heavy Relic »  Swamp Ash JBass, Made in USA by AllParts.
Handwound ’69 « Jazztone » Pickups handmade in Dallas, Texas.
Genuine Fender American Vintage style bridge and Sandberg Germany tuners.
 
Made in USA.
 

 

Out of stock

Category:

Description

  • Two-pieces selected light Swamp Ash JBass body, made in USA by AllParts (Heel and neck engraved).
  • Hand finished by S71 in Switzerland with a Sonic Blue 100% Nitro Relic finish.
  • Allparts USA Lefty Hard-Rock Maple/Rosewood under Fender Licence Neck.
  • Chuncky C Profil .89/1.01, radius 10 (full specs below), Vintage Tint Relic finish.
  • Handwound Collins ’69 JazzTones Pickups, handmade in Dallas, Texas.
  • Modeled after the 1969 original Fender Pickups with two Alnico V magnets per string, outputs 8.24k/8.12K. (Full specs below).
  • Bourns Audio Pro made in USA pots, real PIO .47 capacitor from Russian military 1988, made in Italy high-quality output jack.
  • Genuine Fender American Vintage style bridge, spiral saddles in brass.
  • Sandberg Germany F-Type Vintage style machine heads.
  • Aged control plate made in California, Gotoh Japan heavy metal knobs & Neckplate with 1961 F-type serial.
  • Graphtech Canada XL JB nut.
  • Total weight 3.9kgs / 8.59lbs.

 

———–

 
Jazztone Pickups, Handwound in Texas, USA:
  • Jazztone Bass pickup set made from the finest materials
  • Jazztone is modeled for the Fender Jazz Bass bass guitar after the original 1969 model with single coil pickups two magnet per string non staggered .187 Alnico 5 magnets oriented N- (neck) S- (bridge) and calibrated for strength
    These pickups are overwound progressively 6.67% to bridge for balance
    They are reverse wound and will hum cancel with both volumes maxed
    High quality vulcanized fiber flatwork gray .093 top and bottoms
    Made in the U.S.A. hand wound in Texas in my own shop
  • Though ohms are subject to change in temperature these read around
  • 8.12 K (neck) 3.78 Henries
  • 8.24 K (bridge) 3.98 Henries
    measured around 70 degrees
 
AllPArts USA Under Fender Licence Neck specs:
  • Left-handed
  • 20 frets
  • Maple bass neck
  • Rosewood fingerboard with white inlay dots
  • 10″ radius
  • Nut width 1.5″
  • Heel width 2-7/16″
  • Truss Rod adjustment at heel
  • Neck thickness .89″ at first fret, 1.01″ at twelfth fret
Go to Top